Built for creators who need durability without compromise.
PETG balances toughness and clarity, giving you parts that look as good as they perform. It’s the go-to choice for makers who want professional-grade results without the fuss — smooth extrusion, strong adhesion, and prints that last through real-world use.
• Excellent layer adhesion and smooth surface finish
• Higher impact resistance than PLA
• Minimal shrinkage and warping
• Easy to print with standard settings
Functional prototypes, tool holders, mechanical parts, and any project that needs clean lines and lasting strength.
Every spool is made from 100% brand-new, imported raw materials — never recycled, never mixed.
We focus on composition first, not cutting costs, so your results stay consistent spool after spool.
• Nozzle Temp: 230–250°C
• Bed Temp: 70–90°C
• Print Speed: 40–60 mm/s
• Cooling Fan: On (Low to Medium)
• Build Surface: PEI sheet, glass, or tape with glue stick
• Retraction: 3–6 mm at 25–40 mm/s
• Enclosure: Not required, but helpful in cooler environments
Dry PETG before printing to reduce stringing and improve adhesion. For best layer bonding and clarity, maintain stable ambient temperature and avoid excessive cooling.
Built for creators who need durability without compromise.
PETG balances toughness and clarity, giving you parts that look as good as they perform. It’s the go-to choice for makers who want professional-grade results without the fuss — smooth extrusion, strong adhesion, and prints that last through real-world use.
• Excellent layer adhesion and smooth surface finish
• Higher impact resistance than PLA
• Minimal shrinkage and warping
• Easy to print with standard settings
Functional prototypes, tool holders, mechanical parts, and any project that needs clean lines and lasting strength.
Every spool is made from 100% brand-new, imported raw materials — never recycled, never mixed.
We focus on composition first, not cutting costs, so your results stay consistent spool after spool.
• Nozzle Temp: 230–250°C
• Bed Temp: 70–90°C
• Print Speed: 40–60 mm/s
• Cooling Fan: On (Low to Medium)
• Build Surface: PEI sheet, glass, or tape with glue stick
• Retraction: 3–6 mm at 25–40 mm/s
• Enclosure: Not required, but helpful in cooler environments
Dry PETG before printing to reduce stringing and improve adhesion. For best layer bonding and clarity, maintain stable ambient temperature and avoid excessive cooling.